Welcome to the AudioSmile Forum!

You are currently viewing the forum as a guest which gives you access to view all discussions, but registering an account will give you access to post in discussions, create your own threads, communicate privately with other enthusiasts, respond to polls and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

After you join - You must email admin and ask for your registration to be completed. This is to stop spam. If you don't do this, you will not be able to post.


If you have any problems with the registration process or your account login, please contact us for support.


To register now click here.
Reply
 
Thread Tools
Old 8th October 2005, 23:01   #1
ExpatKiwi
Registered User
 
Join Date: Oct 2005
Location: England
Posts: 2

Is it possible to fix a T-Drive??

Hi to Everyone...

I'm new here, and have a repair question.

My Micromega T-Drive has developed a fault with the CD-tray - it won't eject. Can it be fixed? I realise it's pretty old now, but the sound is great.

Thanks


ExpatKiwi
ExpatKiwi is offline Reply With Quote
Old 9th October 2005, 10:33   #2
adam
Registered User
 
adam's Avatar
 
Join Date: Jun 2003
Location: spain
Posts: 443

You sould try and contact Shadow Audio,the UK distributer.If you put your ear to the case can you hear the clogs wirling?If so,the rubber belt may have come off.
__________________
www.eden-audio.com
adam is offline Reply With Quote
Old 9th October 2005, 20:30   #3
ExpatKiwi
Registered User
 
Join Date: Oct 2005
Location: England
Posts: 2

T-Drive problem

That's definately the sound. I'll give them a call.

Thanks...
ExpatKiwi is offline Reply With Quote
Old 21st November 2005, 14:05   #4
liamjf
Registered User
 
Join Date: Jun 2003
Location: LONDON
Posts: 186

Following on from the above - my T-Drive has now developed a similar fault! Actually took the lid off and the disc tray has managed to strip the teeth from the plastic cog used to drive the tray in and out!
Contacted Shadow Audio (thanks) but they are not sure if they can help as they don't have a Micromega repair service (Yet).
Anyone else know anyone else who might be able to help? Are spare parts like this available?

Thanks in advance, Liam.
__________________
Marantz SA11-S1 - (Coherent Connoiseur) - TAG AV32R-bp192 - (Zanesh Ag/Au) - Coherent modded Bel Canto eVo 6 (Bridged) - (Kimber 4TC) - Coherent Audio modded Meadowlark Ospreys. Trichord 500va powerblock + Coherent mains. (Meadowlark Swan centre, Monitor Audio silver 8i rears + Sonic T-amp)
liamjf is offline Reply With Quote
Old 21st November 2005, 17:30   #5
wadia-miester
Mighty Rearranger
 
wadia-miester's Avatar
 
Join Date: Jun 2003
Location: Beyond the 4th Dimension
Posts: 5,989

There is one person to try, I'm sure he's done a few. I won't touch em at ALL too much grief
http://www.cptacoustics.com/
__________________
Total Musical Integration @ Coherent-Systems
wadia-miester is offline Reply With Quote
Old 21st November 2005, 17:49   #6
bottleneck
talks a load of rubbish
 
bottleneck's Avatar
 
Join Date: Jun 2003
Location: bucks
Posts: 6,782

why not try speaking to Micromega France.

I believe they never stopped trading, just fell out with the UK distributor.
bottleneck is offline Reply With Quote
Old 21st November 2005, 18:18   #7
liamjf
Registered User
 
Join Date: Jun 2003
Location: LONDON
Posts: 186

Thanks, I'll give CPT a try. Any idea of an email for the service side of Micromega France?

Liam.
__________________
Marantz SA11-S1 - (Coherent Connoiseur) - TAG AV32R-bp192 - (Zanesh Ag/Au) - Coherent modded Bel Canto eVo 6 (Bridged) - (Kimber 4TC) - Coherent Audio modded Meadowlark Ospreys. Trichord 500va powerblock + Coherent mains. (Meadowlark Swan centre, Monitor Audio silver 8i rears + Sonic T-amp)
liamjf is offline Reply With Quote
Old 21st November 2005, 18:24   #8
bottleneck
talks a load of rubbish
 
bottleneck's Avatar
 
Join Date: Jun 2003
Location: bucks
Posts: 6,782

http://www.micromega-hifi.com/en/support.html
bottleneck is offline Reply With Quote
Old 23rd November 2005, 20:00   #9
liamjf
Registered User
 
Join Date: Jun 2003
Location: LONDON
Posts: 186

Thanks for the info - haven't heard from CPT yet, but did manage to get an email back from Micromega. They have offered me a whole new disc tray/loader mechanism for 250 Euro delivered. To me that seems a bit steep. So I wondered if a replacement might not be in order. But not sure which way to go. Belive I have a few options:
1) Get a new (i.e. second hand) CD transport. Likely suspects are the Meridian 500 or one of the TEAC VRDS transports (seen S10se + T1, how do they compare? Second hand prices?)
2) Get a new (i.e. second hand) DVD transport and also sell dvd player. Most likely option would be to get a TAG DVD32R as this would match the AV32R dac and I could use the sync link which apparently is very good. DVD32Rs seem to go from £900-£1600 (depending on options)
3) Get a new (i.e. second hand) CD Player. Not sure about this, but there seem to be quite a few second hand bargains. Seen a couple of Wadias (Wadia 6 for £1200?) or a 301 (s/h price?) or something from Copland or Classe (heard before and liked sound)

So, any advice on which way to go? Any advice gratefully received.
Cheers.
__________________
Marantz SA11-S1 - (Coherent Connoiseur) - TAG AV32R-bp192 - (Zanesh Ag/Au) - Coherent modded Bel Canto eVo 6 (Bridged) - (Kimber 4TC) - Coherent Audio modded Meadowlark Ospreys. Trichord 500va powerblock + Coherent mains. (Meadowlark Swan centre, Monitor Audio silver 8i rears + Sonic T-amp)
liamjf is offline Reply With Quote
Old 23rd November 2005, 20:14   #10
wadia-miester
Mighty Rearranger
 
wadia-miester's Avatar
 
Join Date: Jun 2003
Location: Beyond the 4th Dimension
Posts: 5,989

Shadow are selling a Teac P-30 for £900 a serious bargin more than worth the asking price IMO
__________________
Total Musical Integration @ Coherent-Systems
wadia-miester is offline Reply With Quote
Old 30th November 2005, 13:00   #11
liamjf
Registered User
 
Join Date: Jun 2003
Location: LONDON
Posts: 186

Thanks guys, looking to get the T-amp repaired (if I can) whilst saving up the the pennies for the next upgrade! Thanks for the heads up about CPT Accoustics Tony, Colin has agreed to look at it and hopefull he can fix it.
Meantime, I am trying to find out what transport/loader mech it uses. Research (and Micromega) have pointed to a Philips 12.4 mech but I took a look at mine and whilst the loader says "912/04" the laser assembly states "CDM-9/65". Could this be a Philips CDM-9 mech?
Can you shed any light Bottleneck?

Liam.
__________________
Marantz SA11-S1 - (Coherent Connoiseur) - TAG AV32R-bp192 - (Zanesh Ag/Au) - Coherent modded Bel Canto eVo 6 (Bridged) - (Kimber 4TC) - Coherent Audio modded Meadowlark Ospreys. Trichord 500va powerblock + Coherent mains. (Meadowlark Swan centre, Monitor Audio silver 8i rears + Sonic T-amp)
liamjf is offline Reply With Quote
Old 30th November 2005, 13:33   #12
bottleneck
talks a load of rubbish
 
bottleneck's Avatar
 
Join Date: Jun 2003
Location: bucks
Posts: 6,782

hiya, sorry haven't a clue on that one! I don't think I've opened up a CD player in my life
bottleneck is offline Reply With Quote
Old 30th November 2005, 13:56   #13
liamjf
Registered User
 
Join Date: Jun 2003
Location: LONDON
Posts: 186

From Micromega:

"The loader is a 912/04 and the mechanism is a CDM9 ( modiifed by us )."

now I have no idea which mech I need!
__________________
Marantz SA11-S1 - (Coherent Connoiseur) - TAG AV32R-bp192 - (Zanesh Ag/Au) - Coherent modded Bel Canto eVo 6 (Bridged) - (Kimber 4TC) - Coherent Audio modded Meadowlark Ospreys. Trichord 500va powerblock + Coherent mains. (Meadowlark Swan centre, Monitor Audio silver 8i rears + Sonic T-amp)
liamjf is offline Reply With Quote
Old 9th January 2009, 03:14   #14
PhilH
Registered User
 
Join Date: Jan 2009
Posts: 1

Since this is the only thread that google finds which ties the T-Drive to the 912/04 loader I thought I would add some clues which I hunted down after a lot of searching about the transport not driving in and out any more.

My T-Drive is from 1993 according to the board dates.
The transport is as has been said above, marked 912/04, which is a high quality transport made by Philips, probably by their subsidiary Daisy Laser who made the CDM9 laser mechanism. There is a Philips part number following the 912/04 number on the label.

http://www.daisy-laser.com/products/products_map.htm

The laser mechanism is marked CDM9/65 on the label, followed by another Philips part number. This is a variant of the type called CDM9Pro - threads also mention CDM9/60 on some CDM9Pro type assemblies. I dont know the difference.

The CDM9Pro is described as different from the standard CDM9 through using a brushless spindle drive for the CD rotation, as opposed to brushed (thereby reducing motor induced electrical noise and eliminating brush failure). Other possible differences are the use of metal instead of plastic CD spindle, and the use of a superior metal frame. There is some mention of differences in glass / plastic lenses, but most sources agree that CDM9s and CDM9Pros use identical laser / lens assemblies and that plastic was only introduced with the CDM12. The standard CDM9 is CDM9/44.

The CDM9 is a high quality radial swinging arm design which gives extremely high audio accuracy at the expense of slow access speeds (changing tracks takes a long time on these drives). Subsequently the designs changed to linear three diode assemblies allowing multiple simultaneous reads, and paving the way to faster access and faster reading for non audio applications.

Audio Quality

These mechanisms are the peak of the radial arm series of designs and were used only on the highest end machines of their day. Later mechanisms use different technology, some people like them, but many regard the CDM9 and some of the other top end CDM products as unsurpassed.

I use T-Drive (Mark 1) -> AES link -> T-Dac -> Transparent Link cables -> Copland CDA28 -> Transparent speaker cables -> B&W CDM1SE and ACI Titan kit sub.

I bought this equipment in 1998 except the Titan which I built in 2001. After auditioning numerous CDs I complained they all sounded CDish and unlike the sound I used to get from my Rega Planar 2 / Lux amp / Tangent TM1 speakers.

Thats when the salesman said, ah I thought you were here to buy hi-fi, why didnt you say you wanted music. He produced the T-Drive and T-Dac from the second hand pile and put the Transparent cables on.

I have to say the effect was unbelievable. Up until then I had been listening to speakers. At that point (in their optimised listening room I accept) the speakers simply disappeared and became a soundscape of instruments and voices.

I find it amazing demoing it to people. For 95% of people the system is a waste of money, they simply cant hear it. For the other 5% they don't want to leave it. And I've given all three of my children a big problem, 2 have already left home, and they miss the system big time. (They'll have to make do with the Marantz stuff I bought them until they can earn it !)

Sorry for the personal narrative - its part of the story, hope you dont mind ;-) The Micromega has had tough family use for 10 years now (and is actually 15 years old). I always leave it on, using the rubric that pulsing equipment is generally worse for the components than steady state, and anyway who knows how long it really takes to stabilise when you switch it on. (The system gave me headaches for the first few days of listening).

Info on the CDM family from a Marantz perspective:

http://www.marantzphilips.nl/index.a...M&strPage=Info

The also claim to have service instructions here;
http://www.marantzphilips.nl/philips_service_manuals/
but I would try diyaudio first.

Repairs:
[Go to DIYAudio and learn about about how to do this sort of stuff. Use static protection as static can kill the laser or other circuitry. Be very gentle with delicate circuits, connectors, or ribbons / cables. If you arent expert / its worth a lot to you then consider hiring an expert such as http://www.cptacoustics.com/]
[[I dont know him, he is just recommended in a CDM9 thread]]

CDM9 and CDM9Pro mechanisms became unavailable as new spares from Philips about 2007 and are now only available from salvage parts, but there seem to be plenty of the CDM9s around. They were used almost exclusively in high end players so can be recovered from some high end Philips, Rotel, Theta, Marantz, Arcam (5,6) etc. There is a list out there but I cant find it again right now and am not going through every site I visited again ! They were also available for some reason in a couple of Philips CDROMs: CM201 CM206

If the laser fails its possible to use a laser from any CDM9 as they are all the same. The swinging arm and laser assembly can be transferred.

If the machine has difficulty reading TOC or skipping, it may be because the swinging arm is stiff. Many users have had success with removing the ball bearing cover and adding a small drop of suitable lubricant - search the diyaudio threads for details on the right stuff - dont just use anything you may regret it.

If the spindle is damaged some canny users have managed to get one off another mechanism, it may be "superglued" on and need some pressure and a sharp tap to break the glue bond and release the CD spindle from the motor axle. The 9/44 axles is a little smaller than the 9PRO so it can be opened out to fit the 9/65 presumable the reverse is impractical.

The drive tray doesnt drive in and out any more, after sounding graunchy for a while.

This is a common problem with all CDM9 trayloaders. The CDM9 package was shipped with slightly different trayloaders for different companies, but they seem to all have been supplied with the same tray drive gear, and that gear has aged on many players to the extent that the drive teeth break off.

An interaction between aggressive grease and the plastic is often claimed to be the cause. Philips and others manufactured replacements in a different plastic, but the Philips ones recently became unavailable. However there are still Far East made replacements available, just type CDM9 gear into Ebay or a search engine and you should find them.

Some cunning folk have cut the gearteeth from the end of the pulley shaft and got local repair guys to find a gear wheel the right size to glue on the shaft. Other cunning people have wound some soft but durable rubber in place of the gear and use it to drive the tray rack, at least as a short term solution.

My solution, borrowed from a thread, is to add a handle and turn it into a manual tray loader. I unscrewed the metal piece on the front of the tray trapped some elegant fine wire at the left and right ends and screwed the fascia piece back leaving the wire hanging out the front. I removed the broken gear so it doesnt rattle on the tray and disconnected the tray motor connector so it doesnt whir when the CD wants to eject. Now you just press the Disk button and pull the drawer open. Close doesnt need a button press, it recognises it automatically. I love my T-Drive and have no intention of opening it for another repair unnecessarily. Even for the expert every time inside an older bit of equipment is a risk.

The grease is said to dry out and stiffen. If the tray leader struggles to go in and out but still moves then open the unit (four screws underneath and pull the top / sides case away from the floor/front/back). Then clean off visible grease from the sliders. Then apply silicone cleaner (Maplin) and regrease with a small amount of silicone grease (Maplin). Dont use any standard oil based grease, they attract dirt, dry out and stiffen with time.

Acting when the tray becomes sluggish may deter gear failure.

Prices
At the time of writing in Jan 09, a search on Ebay shows gears in the range $20-30. On the complete mechanism GranData http://<br /> http://www.grandata.c...sm-p-4987.html
shows CDM9 at £24, and theres a replacement CDM9Pro on US Ebay at $110, but the threads suggest these are pretty hard to come buy and can be suspect depending on the source.


Further Reading:
The info here was gathered from all over the web, but the single biggest source of amazing expertise is the diyaudio forum where there are people incredibly knowledgeable about the inside of CD players.
PhilH is offline Reply With Quote
Old 9th January 2009, 07:15   #15
zanash
Registered User
 
zanash's Avatar
 
Join Date: Jun 2003
Location: Notts.
Posts: 3,845

great info !
__________________
Due to the current down turn and so called credit crunch ...The cable making etc has been put into hibernation. Please feel free to ask questions, but the day to day cable building is suspended as I can't justify passing on the high cost of the raw materials ie in some cases a 100% rise in the wholesale prices.
zanash is offline Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


GMT +1 time is 02:48 - vBulletin, Jelsoft